Disclaimer:-Febjan.com is an independent third party technical support provider and managed IT service providing company and do not have any affiliation with any brand unless specified. Any use of Trademark, Logo, brand or services is only for references.By opting support from our website, we may charge you some nominal amount depending on support type and your agreement and acceptance of our terms.The vendor may provide free support, Call vendor for Direct Support



If you have clicked on this article, we are sure that you must have several questions about router login, what it is, how it works, its features, router setup, wifi login, router configuration and so much more.

Router is a device which receives the data and sends it to and from the computer networks. The job of router is to examine a data packet’s IP address and then transfer it.


The use of router takes place in Wide Area Network AKA WAN and the Local Area Network AKA LAN.

Router installation can share information with various other routers.

Router is definitely more expensive in comparison with hubs and switches.

Now that you know what router is, you might want to know about the detailed router setup, router installation, setup new router, router configuration, router login, and everything else. Do not worry, we have got you covered, as, in this section of the article, we are going to talk about router setup. Let’s get going!

Before you get started with router login, ensure that you have a good internet connection. In case you do not have one, the process can get a little frustrating as slow internet won’t let you proceed with router setup easily.

Grab all the instruction manuals and stickers that have router setup and router login information. This step will ensure that you do not fall short of any information during the process. This will also ensure that you do not get irritated. The instructions might also have the default password and username of your router.

Before you get started with the process, ensure that the antennas of router are extended.

Place your router in an open area or at a place where the networks of router login reach all parts of the place.

Now comes the main part! Connect my router to get the internet connection. You need to connect the Ethernet cable to your router’s internal port or the WAN.

Now is the time to check the LED lights. The LED lights indicate that your router has an internet connection. In case you do not see the LED lights, ensure that you have a good connection and that the cable is plugged into the right port. Once done, test the internet connection with your device.

Now is the time to connect to the gateway. Once done, you can use an app to proceed with your router setup.

Once done, you will have to create a new username and password of your router. In order to do this, you will have to enter the default password and name, and then change it according to your needs.

After changing the username and password, you will have to update the firmware of router login. It is suggested to update it as soon as you can.

Create the password of your Wi-Fi.

Use the auto-router configuration features to continue with router setup.

Now that you are done with all the necessary steps, the last step is to set up router security. This is to ensure the safety and security of your router. As soon as you are done with the same, your router setup will be complete.

So this was our router login guide and we are sure that it must have helped you in every possible way. We aim to answer all your questions so that you do not come across any hurdles while setting up router. So, that was it from our end! We will see you in the next on

How to access router

router wifi

Router is an internetworking device which receives, analyzes, and forwards data packets between computer networks. It examines the destination IP address of a data packet and decides the best possible way of transferring the data packet.

A wifi router or a wireless router acts as a gatekeeper to the wireless connection you have been using, transforming the wired internet connection from your modem and converting it into a wireless one.

So to make sure that you can keep powering through those online work meetings or download movies and videos to binge on, learning how to setup wifi router is of utmost importance.

Setting this router up looks like an ordeal to many. However, this does not have to be the situation. Router setup and router login can be a fairly easy process if you follow some basic steps.

With router manufacturing companies putting in extra efforts to make the process of router installation easier with every new product, the user has very little to worry about.

Follow the steps given below to setup your wifi router and router login in an easy, hassle-free manner


To get the best and most even network coverage, the best place to put your router would be an open space at the centre of your house or office. However, placing router at such spots is not always possible since it needs to be connected to a wired network gateway that is mostly attached to a cable near the outside wall.

In such cases find the most suitable position you can, which can provide you with the maximum coverage.


Connect router to the ethernet port of the Internet Service Provider’s gateway for internet connection. You can also install a mesh network, which allows multiple Wi-Fi transmitters on one network. This would allow you to get strong internet connections in all the rooms.

Use a basic ethernet cable to plug into router’s internet port. This port is generally distinguished from the other ones using a different color. If your connection has been successful, the LED lights of your router should light up as a confirmation.

If the lights have not lit up check if you have plugged the cable into the right port. To test the connection, check by connecting a device – router login.


In most cases, Internet Service Providers offer gateways that have built-in routers. However, these are not suited for work environments and neither do they come with extra ports. These do not allow the addition of services and expansion of networks.

If your gateway does have a built-in router, you will need to configure the gateway for disabling router. Then you will have to pass the WAN IP address that your ISP provided, along with all network traffic to your new router.

This step is essential as avoiding it might lead you to fall in trouble as your devices might not be able to function properly. This step mostly requires the help of the Internet Service Provider.


Turn off the gateway. Unplug the ethernet cable plugged into the gateway of the LAN and plug it into the WAN port of router. After turning the gateway on again, wait for a few minutes so that it boots up. Connect router to a power supply and switch it on.

The next step to take for router setup is to use an application or router’s web-based dashboard for connecting it to a computer through an Ethernet cable.

You will find the IP address of router printed on the backside of the device itself.


For configuring router you will be required to log in. For this, you will have to use the default username and password which comes printed on the device or in a user manual.

As soon as you have logged in, change the username. Also, change router password and use ones of your own preference. Change the Wi-Fi username and password to make it secure.

These five easy steps should help you to set up a new router easily and without much trouble. That was it from our end today! We will see you in the next arti


If we put it in simple words, router is a device that sends and receives the data on various computer networks. Routers come in handy to improve the connectivity of the internet and to connect various devices to one another.

Now that you know what router is, let us discuss a few features of router. A wifi router login has several features and if you want to dig into the details of router login, then this paragraph is for you!



When it comes to working on the OSI model, router works on the OSI model’s 3rd layer which is also its Network Layer.

●       The job of router is to offer a high-speed internet connection along with various ports such as STM link pot, fast-Ethernet, and gigabit.

●       Lets you configure your port according to your own network requirements.

●       Router consists of a CPU, RAM, network, flash memory, interface card, and console.

●       It can route traffic with ease.

●       Ensure that unwanted interference gets filtered.

●       Routers work in the slave and master mode.

●       Router lets you connect with various WANs and LANs.


Now that you know all the features of router, you must be wondering about how you can set it up. Yes, we are going to give you a detailed router setup guide here as well.

From router login, wifi login, router configuration, to router installation, setup wifi router, and router support, we are going to cover it all for you!

Resetting of Router

For this step, you need to connect your power cord and you need to ensure that all the Ethernet connections are disconnected. Once done, you need to hold the reset button for a minimum of 15 seconds. 

Setting Up the Cable

In this step, you will have to connect your computer device to the WAN port. You need to ensure that you do not connect anything to the LAN ports.

Accessing Router

Use the computer that is connected to my router, and open the browser for router login. Then, go to settings and find out your IP address. The IP address needs to be entered in the Address bar of the computer’s browser.

Configuration of the Wireless SSID

For this step, tap on Wireless and then click on basic wireless settings. Now, enter the name as per your choice, and set up the password. Once done, save the settings.

Configuration of Wireless Along With the Security Key

Security of the wireless network is essential and in case you are unable to do it, then you may get disconnected. You should always secure your wifi using WPA-2 or WPA.


  • Click on Wireless
  • Then, tap on Wireless Security
  • Once done, click on WPA Pre-Shared Key
  • Now, set your my router WPA algorithm to the setting of AES
  • In case AES is not available, select TKIP
  • Type your key that is WPA Shared and ensure that the key of router setup is difficult enough
  • Once done, tap on save settings

Setting Up of the Cable

For this step of your router setup, connect it to the ports that are colored.

Verification Process of Router Setup

In this step of your router setup, restart your computer and when it turns on, click on start, then go running, and press cmd. Then, tap on the open field and press ok.

And that is it, your router login is done.

Yes, router setup can be a little tricky but it is not as difficult as it sounds. Once you start following our instructions, you will see that you will be done with router login in no time. We aim to provide you with quality information and we hope that this article helped you in every way possible. 


If you have jumped onto this article, you might be someone who is interested in everything about router setup, router login, router configuration, and wifi login. Yes, you are in the right place, and today, we are going to help you out with these basics.

Let us start with a very basic question. What is router?

A device that is used for networking data packets from one computer network to another is known as router. The function of traffic directing on the internet is done by router. Your data such as websites, or emails are sent via the internet, in the form of data packets.

Now that you know the basic definition, and function of a router, let us talk about router setup, router login, and wifi login. A router setup is not that easy, but it is not complicated as well. 


  1. The first step of router setup guide needs you to disconnect all the Ethernet connections, and you must connect the power cord as well. Once you are done with this step, you will have to hold the reset button for at least 15 seconds.
  1. Now that you are onto the second step, you will have to connect the WAN port with your computer device. At this moment, you also need to make it a point that nothing is connected to the LAN ports.
  1. In this step, you need to make use of the computer that you connected to my router, and then you will have to open the browser. Once done, go to settings and look for the IP address. You need to enter the IP address in the computer browser’s address bar.
  1. We are now on step four and all you need to do here is that you need to click on Wireless and then press on Basic Wireless Settings. Then, you need to create a name for your router and set up a difficult yet easy to remember password. Save the settings and you are good to hop on the next step.
  1. A wireless network needs to be secure as it is highly vital to do so. In case you fail to secure your network, chances are that you will get disconnected. Hence, your Wi-Fi should be secured with WPA or WPA-2. 


●       Tap on Wireless

●       Then press Wireless Security

●       Tap on WPA Pre-Shared Key

●       Now is the time to set the WPA algorithm of my router. The setting needs to be AES

●       If you cannot find AES, tap on TKIP

●       Type the key of your router setup and ensure that it is not too easy

●       Now, simply click on Save Settings

  1. In order to be done with this step of router setup, you need to connect your router to the colored ports
  1. This is the last step of router setup, and it requires you to restart the computer. Once it gets back on, tap on start and press on run. Then, press cmd and click on Open Field, there you will have to tap on Ok. Voila! The router setup is complete.

Yes, it was easy to router login and set up a router. Well, we wouldn’t count it as too easy, but if you do it properly, you won’t face any troubles. We aimed to make the guide simple for you so that you can understand my router, and act accordingly. We will see you at the next one!